If you’ve got an old Ford N-series tractor that’s been sitting in the barn or running rough, chances are it’s time for some engine attention. These flathead engines are as simple as they come, but after decades of work, the cylinders wear and the gaskets start weeping. This basic overhaul kit gets your old workhorse back to running smooth and strong with everything you need for a solid rebuild.
What You’re Getting
- Heavy-duty .090-inch thick wall sleeves that’ll handle years of hard work
- 3-ring pistons designed to seal properly and reduce oil consumption
- Complete set of piston rings matched to work with the new pistons
- Pin bushings, wrist pins, and retainers for proper piston assembly
- Full gasket set to seal everything up tight from top to bottom
Built for Real Farm Work
This kit fits the classic Ford 2N, 9N, and 8N tractors with their trusty 4-cylinder, 119.7 cubic inch gas engines. These little workhorses were the backbone of American farming for decades, handling everything from cultivating and mowing to belt work and loader duty. The 3-3/16 inch bore size matches the original factory specifications perfectly.
Made to Last
The thick .090-inch wall sleeves are built tough to handle the thermal expansion and stress of farm work. Tru-Power has been making quality engine rebuild kits for decades, and they understand what it takes to get an old tractor engine running right and keep it that way.
Good to Know
This is a basic kit, so you’ll need to source your main and rod bearings separately if yours need replacing. The thick wall sleeves mean you can rebuild engines that have been bored before, giving new life to blocks that might otherwise be scrap. Take your time with the assembly—these old engines respond well to careful work and proper break-in procedures.
