When you’re dealing with hydraulic lines on your equipment, you need connections that won’t let you down in the middle of a job. This Ryco Bitelok fitting gives you a solid, reliable connection for your 1/4 inch hydraulic hose that’s built to handle the pressure and vibration that comes with farm work.
What You’re Getting
- DKL metric thread design (M12x1.5) that’s common on European tractors and implements
- 24-degree cone seal that creates a tight, leak-free connection without needing O-rings
- Straight male configuration that connects directly to female ports and fittings
- Crimped connection that grips your hose securely – no clamps to work loose
- 6mm tube size with 25mm cutoff allowance for proper installation
Built for Real Farm Work
This fitting is designed for hydraulic systems on tractors and implements that use the DKL metric standard. You’ll find these threads on loaders, three-point systems, and remote hydraulic circuits. The straight design works well in tight spaces where you need a direct connection without any bends or angles.
Made to Last
Ryco’s Bitelok series is engineered to handle the high pressures and constant vibration of hydraulic systems. The 24-degree cone creates a metal-to-metal seal that stays tight even when things get rough, and the crimped attachment means the fitting becomes part of your hose assembly.
Good to Know
This is a crimp-on fitting, so you’ll need the right crimping equipment to install it properly. Make sure to cut your hose square and clean, then crimp according to the manufacturer’s specifications. The 25mm cutoff allowance tells you how much hose to trim back from the end for proper insertion depth.
