Clean oil is your engine’s lifeline, and if you’ve been putting off that oil change because you need a filter, here’s what you’re looking for. This Baldwin oil filter keeps your Kubota running smooth by trapping dirt, metal particles, and sludge before they can damage your engine’s internals. It’s one of those parts that doesn’t cost much but saves you thousands in engine rebuilds.
What You’re Getting
- Anti-drainback valve keeps oil in the filter so you don’t lose pressure on startup
- 20 PSID bypass valve protects your engine if the filter gets clogged
- Baldwin quality construction that meets OEM specifications
- Exact M20 x 1.5 thread fit – no modifications or adapters needed
- Compact 2 5/8 inch length fits tight engine compartments
Built for Real Farm Work
This filter is designed specifically for Kubota engines found in everything from compact tractors to utility vehicles and construction equipment. Whether you’re running a sub-compact for mowing or a utility tractor for loader work, clean oil filtration is critical for keeping these hardworking engines reliable season after season.
Made to Last
Baldwin has been making filters since 1936, and they know what it takes to handle farm conditions. The filter media captures contaminants down to the microscopic level while the steel housing withstands vibration and temperature extremes. The bypass valve ensures oil keeps flowing even if the filter gets overloaded – protecting your engine from damage.
Good to Know
This is a standard spin-on filter that installs just like the original. Make sure to coat the rubber gasket with a thin film of clean oil before installation and hand-tighten plus 3/4 turn. Don’t over-tighten – the gasket does the sealing, not the threads. Change your filter with every oil change or according to your operator manual’s schedule.
